3112-7. Roadway Turnarounds.
This section is included in your selections.
Turnarounds are required on driveways and dead-end roads as specified in these regulations. The minimum turning radius for a turnaround shall be 40 feet from the center line of the road, not including the parking lane. If a hammerhead ”T” is used, the top of the “T” shall be a minimum of 60 feet in length. If a slip “T” design is used, the projection shall have a minimum depth of forty (40) feet. Turnaround designs shall conform to the diagrams below in Figures 3112-7A, 3112-7B and 3112-7C, as applicable. (Ord. 1952, § 1, 12/17/1991; Ord. 2540, Section 1, 11/17/2015)
Type 1
On-Street Parking Prohibited
Type 2
On-Street Parking Allowed
3112-7B Hammerhead “T”
Type 1
On-Street Parking Prohibited
Type 2
On-Street Parking Allowed
3112-7C Slip “T”