Skip to main content
Loading…
This section is included in your selections.

40.1 Y: SPECIFIED MINIMUM AND AVERAGE LOT SIZES

(See also Special Combining Zone “SY”)

40.1.1 Special Representation for Minimum Lot Size, where a Minimum Lot Size and Minimum Average Lot Size are Both Specified. Whenever the principal zone is modified to specify a minimum lot size and a minimum average-lot size that must be maintained in subdividing any lot within the zone, the following designators shall be used as applicable: (Former Section CZ#A313-41(G))

40.1.1.1Y - where the development standards are modified for the sole purpose of specifying a minimum lot size and minimum average-lot size. (Former Section CZ#A313-41(G)(2))

40.1.1.2Y (x) - where, on the zoning maps, “x” indicates the minimum lot size, and where the subdivision of any parcel results in a density consistent with the General Plan. As part of the subdivision action, a rezone to the appropriate Y(x) parcel size designation shall be required. As necessary to maintain consistency with the General Plan, the lot size specification requirements shall be a part of the enforceable restrictions of the subdivision. (Former Section CZ#A313-41(G)(3))

40.1.1.3(See also, the subsection, Special Combining Zone “SY.”)